APT75DL120HJ APT75DL120HJ C rev 1 otober, 2012 www.microsemi.com 1-4 absolute maximum ratings symbol parameter max ratings unit v r maximum dc reverse voltage v rrm maximum peak repetitive reverse voltage 1200 v i f(av) maximum average forward current duty cycle = 50% t c = 80c 75 i frm maximum repetitive forward current limited by t jmax 8.3ms t j = 45c 150 a these devices are sensitiv e to electrostatic discharge. proper handling procedures should be followe d. see application note apt0502 on www.microsemi.com v rrm = 1200v i f = 75a @ tc = 80c application ? switch mode power supplies rectifier ? induction heating ? welding equipment ? high speed rectifiers features ? ultra fast recovery times ? soft recovery characteristics ? high blocking voltage ? high current ? low leakage current ? very low stray inductance ? high level of integration ? isotop ? package (sot-227) benefits ? outstanding performance at high frequency operation ? low losses ? low noise switching ? direct mounting to heatsink (isolated package) ? low junction to case thermal resistance ? rohs compliant isotop ? fast diode full bridge power module ~ ~ - + downloaded from: http:///
APT75DL120HJ APT75DL120HJ C rev 1 otober, 2012 www.microsemi.com 2-4 all ratings @ t j = 25c unless otherwise specified electrical characteristics symbol characteristic test conditions min typ max unit t j = 25c 1.6 2.1 v f diode forward voltage i f = 75a t j = 125c 1.6 v t j = 25c 250 i rm maximum reverse leakage current v r = 1200v t j = 125c 500 a dynamic characteristics symbol characteristic test conditions min typ max unit t j = 25c 170 t rr reverse recovery time t j = 125c 280 ns t j = 25c 7 q rr reverse recovery charge t j = 125c 14 c t j = 25c 3 e rr reverse recovery energy i f = 75a v r = 600v di/dt = 2000a/s t j = 125c 5.5 mj thermal and package characteristics symbol characteristic min typ max unit r thjc junction to case thermal resistance 0.58 r thja junction to ambient 20 c/w v isol rms isolation voltage, any terminal to case t =1 min, 50/60hz 2500 v t j ,t stg storage temperature range -55 150 t l max lead temp for soldering:0.063 from case for 10 sec 300 c torque mounting torque (mounting = 8-32 or 4mm machine and terminals = 4mm machine) 1.5 n.m wt package weight 29.2 g sot-227 (isotop ? ) package outline 31.5 (1.240)31.7 (1.248) dimensions in millimeters and (inches) 7.8 (.307)8.2 (.322) 30.1 (1.185)30.3 (1.193) 38.0 (1.496)38.2 (1.504) 14.9 (.587)15.1 (.594) 11.8 (.463)12.2 (.480) 8.9 (.350)9.6 (.378) hex nut m4 (4 places) 0.75 (.030)0.85 (.033) 12.6 (.496)12.8 (.504) 25.2 (0.992)25.4 (1.000) 1.95 (.077)2.14 (.084) r = 4.0 (.157) (2 places) 4.0 (.157)4.2 (.165) (2 places) w=4.1 (.161)w=4.3 (.169) h=4.8 (.187)h=4.9 (.193) (4 places) 3.3 (.129)3.6 (.143) 3.30 (.130)4.57 (.180) downloaded from: http:///
APT75DL120HJ APT75DL120HJ C rev 1 otober, 2012 www.microsemi.com 3-4 typical performance curve energy losses vs collector current 0 2.5 5 7.5 0 25 50 75 100 125 150 i f (a) err (mj) v ce = 600v v ge = -15v t j = 125c forward characteristic of diode t j =25c t j =125c t j =125c 0 25 50 75 100 125 150 0 0.4 0.8 1.2 1.6 2 2.4 v f (v) i f (a) maximum effective transient thermal impedance, junction to case vs pulse duration 0.9 0.7 0.5 0.3 0.1 0.05 single pulse 0 0.1 0.2 0.3 0.4 0.5 0.6 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular pulse duration (seconds) thermal impedance (c/w) isotop? is a registered trademark of st microelectronics nv downloaded from: http:///
APT75DL120HJ APT75DL120HJ C rev 1 otober, 2012 www.microsemi.com 4-4 disclaimer the information contained in the document (unless it is publicly available on the web without access restrictions) is proprietary and confidential information of microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of microsemi. if the recipient of this document has entered into a disclosure agreement with microsemi, then the ter ms of such agreement will also apply. this document and the information contained herein may not be modified, by any person other than authorized personnel of microsemi. no license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by impli cation, inducement, estoppels or otherwise. any license under such intellectual property rights must be approved by microsemi in writing signed by an officer of microsemi. microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. this product has been subject to limited testing and should not be used in conjunction with li fe- support or other mission-critical equipment or applications. microsemi assumes no liability whatsoever, and microsemi disclaims any express or implied warranty, relating to sale and/or use of microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. user or customer shall not rely on any data and performance specifications or parameters provided by microsemi. it is the customers and users responsibility to independently determine suitability of any microsemi product and to test and verify the same. the information contained herein is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the user. microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. the product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp life support application seller's products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the seller's product could create a situation where personal injury, death or property damage or loss may occur (collectively "life support applications"). buyer agrees not to use products in any life support applications and to the extent it does it shall conduct extensive testing of the product in such applications and further agrees to indemnify and hold seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, dam ages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damag e or otherwise associated with the use of the goods in life support applications, even if such claim includes alle gations that seller was negligent regarding the design or manufacture of the goods. buyer must notify seller in writing before using sellers products in life support applications. seller will study with buyer alternative solutions to meet buyer application specification based on sellers sales conditions applicable for the new proposed specific part. downloaded from: http:///
|
